Sunday 9 September 2012

MY FIRST SCULPT!!!!! (post 100)

well if any of you looked at the projects and ideas blog in the last few days you would have seen this post about my "dream figure" now although it got no comments I decided that it was because of the situation and not a lack of interest in the character. so I pressed ahead and got out the due-kit again. well I did get some more just in case... and I took it upon myself to sculpt the character, now I have limited to no-experience sculpting the last time I did anything like this was when I turned a Friar Tuck figure that had been crushed under a chair into Karri .C. Tuf ( her name is just his rearranged) but this was different, I actually wanted to create a fig from scratch... I used my memory of a few tutorials I had seen before and started making the "skeleton" of the fig from wire. then began the process of adding layers of due-kit, the stuff is not an ideal material; it does not like to be wrapped around the wire and has a habit of splitting if layered up to much. so I had to apply a layer and then bake it before putting on the next. and this was the result! (painted of coarse, the unpainted version is not as impressive).
a bit fuzzy but he is not that detailed when it comes to the sculpting- most detail is painted on

the proportions are good for a first try but his legs seem too short though there is a reason for this

the packs on his belt are way too low! they hide most of his leg making him look out of proportion

the gas mask came out better than expected which was nice

I love the way I got his backpack it was starting to worry me that it might just be a shapeless blob

and of coarse from his best side

here are some comparison shots for you. he is a bit big but he is meant to be a hero so cut him some slack

I used humbrol model filler for the base so you can take a bit of height off because he is standing raised above the others

this shot says it all doesn't it he is a bit chunkier and taller but he can stand with the others
of coarse you still need to see what he is intended to be so here is a short comparison! my figure in my model world and my character in the cyber world I would ask you who is better but I think that we all are slightly biased to the little plastic and metal guy :-D
miniature Vs
cyber! the game is Red Crucible 2 if any of you want to know, I know Emmett (Winttrix) played this because he introduced me to the game















now the fig was not primed- A) because both Due-kit and humbrol are (apparently) ready to paint and require no priming, however I did take the precaution of mixing lots of PVA glue with that base coat of black paint in case it was a case of exaggerating the truth for sales purposes... so far the claim seems to prove true however the humbrol filler did not like the PVA I applied to the base after I was done (standard procedure so that the bases are protected).

PLEASE LEAVE LOTS OF BIG COMMENTS or small ones... I am interested in perhaps doing more sculpting in the future (hence it a new label) and I want to know what you all think!

YAY 100 posts! I have made it this far, not even a year yet. I think that this is a great post to be number 100 something I am (overly?) proud of and perhaps it is a new theme for me, thanks to all off you for coming and reading all these posts and now I reach triple digits all I can hope is that more of you sign up and see what I have been up to!

20 comments:

  1. Replies
    1. that was fast paul, I must have been posting on the Oronegro blog while you made this comment. you must have only been commenting a few mins after it was posted!

      Delete
  2. No photos of the process?

    I like it!

    ReplyDelete
    Replies
    1. sorry perhaps on the next one I will do some pics of the process, depending on what I sculpt; if it is human perhaps and alien or monster maybe not-I am likely to mess up

      Delete
  3. Looks great, I'm also taking my first steps into sculpting not 20mm but 28mm though.

    Cheers and up to some more sculpts, are the pictures of the green?

    ReplyDelete
  4. Well done Gowan, I have toyed with this but never have been happy with the outcomes.

    Keep it up and good work on the 100.

    ReplyDelete
    Replies
    1. sorry to hear that your experience has not been so good :-( I hope that it is not a case of begginers luck for me, and that I can maintain this standard or inprove on it. thanks for the comments

      Delete
  5. A good result for your first sculpt.
    Regards
    Bruno

    ReplyDelete
  6. Nice work Gowan! You have produced a very original figure, that I am sure will serve you well on the tabletop. I am sure that this figure is just the first of many that you will create.

    ReplyDelete
  7. thanks guys its nice to see you all commenting! though I dont think we can get 100 comments for the 100'th post. thanks for the encouragement this past 100 posts and I hope that the next 100 can bring more work to the table that you can enjoy to see.

    ReplyDelete
  8. Far, far better than anything I could achieve, great work and congrats on the 100!

    ReplyDelete
    Replies
    1. I don't know fran all those years of 15mm must have trained your brain for fine work, a 20mm figure would be hard to do sure but I think that you might be able to add more detail than I did.

      Delete
  9. I think that it is a great first sculpt. It actually looks like a soldier in full chemical suit. Keep on sculpting, that's how you get better at it. Or so I'm told since I'm to chicken to try.

    ReplyDelete
    Replies
    1. I was scared for a while too, I think that it was just impulse. I ordinarily ignore such impulses but this time I went; "you know what james (I always refer to myself by my middle name, odd I know) just do it and see" and so I did and I let the impulse run its coarse and in one day I went from a bit of grey due-kit and wire to that figure, hense why I was so excited when I first published the post

      Delete
  10. Very good start!
    it's courageous to sculpt his own figure!
    I don't know if I'll try a day! (I would be happy if I could only do some not-too-bad conversions!)

    ReplyDelete
    Replies
    1. you never know until you try, I was sure that I would fail, infact for a while I thought "no just buy some figs that lend themselves to being cut up and put together as the figure" but I decided as you can tell to just give it a go and I was surprised by the results.

      Delete
  11. Great job Gowan, even with all my conversions I would not know where to start in sculpting. Nice to see all the work you have done while I was away ;D

    ReplyDelete
  12. This comment has been removed by a blog administrator.

    ReplyDelete